GE RPWFE
GE RPWFE is a GE refrigerator water filter. Numbers the manufacturer prints: RPWFE. This page lists only what the manufacturer's own pages say; where they are silent, the answer is marked unknown.
At a glance
- Install: Insert with FRONT showing
- Where it sits: Upper left inside, or in the left door (bottom freezers)
- Replace: When the reminder shows
- Capacity (gallons): Unknown
Details and sources for each line are in the tables below.
Before you order
Some GE filters carry a chip. Whether yours does, and what GE says happens with a wrong filter, is in the RFID and bypass plug guide.
GE RPWFE
GE
Quick answers
| Question | Answer | Source |
|---|---|---|
| Status | Listed by GE for bottom-freezer refrigerators that use RPWFE. GE says the design changed at the start of 2017 and the new one is backwards compatible. | GE: RPWFE |
| Fits fridge brands | Bottom-freezer GE refrigerators that use RPWFE (filter is in the upper-left of the fresh-food compartment). Model list: Unknown. | GE: RPWFE |
| Install | Insert with the word FRONT showing and the front label visible. GE says if BACK shows, reverse it. | GE: RPWFE |
| Replace every | No RPWFE-specific interval on the GE pages we read. GE's general rule for its refrigerator filters: every 6 months, or usually every 170-200 gallons depending on model; the RPWFE control shows a Replace Water Filter reminder. | GE: replacing filter |
| Capacity (gallons) | Unknown: not stated in the OEM sources we read | GE: RPWFE |
| RFID / chip | Yes. RFID detects leaks and monitors filter status. A non-genuine filter without the chip makes the dispenser stop and the display may read 'Leak Detected'. | GE: RPWFE |
| Bypass plug | Exists. GE says one can be ordered at no charge via 1-800-GECARES (Canada 800-561-3344). The display then shows 'Unfiltered Water'. Part number: Unknown, not stated on the GE pages we read. | GE: RPWFE |
| Location | Upper left corner of the fresh food compartment, inside the cartridge holder; GE also says it can be within the left refrigerator door, depending on model. | GE: replacing filter |
| Reset the indicator | Automatic. GE says the RFID resets the Replace Water Filter reminder when a new RFID filter or the bypass plug is installed; on touch-screen models there is no way to reset it manually. | GE: filter indicator light |
| If the reminder will not clear | GE: check that the word FRONT shows on the filter or bypass plug (reverse it if BACK shows); check the filter has the ID chip under the label; disconnect power for 1 minute to reset the appliance; otherwise service may be needed. | GE: filter indicator light |
Part numbers and aliases
| Number | What it is | Source |
|---|---|---|
| RPWFE | Number printed by the manufacturer | GE: RPWFE |
GE says the filter's ID chip detects a wrong or non-genuine part and the dispenser will not work; the display may read 'Leak Detected' or 'Replace Water Filter'. This is GE's statement about its own system.
Fridge models
No fridge-model list for this filter in our sources. Use the manufacturer finder below.
Check your exact model with the manufacturer: GE Appliances water filter finder (enter your fridge model)
Sources for this page
- Refrigerator - Water Filter Indicator Light Will Not Shut Off — GE Appliances. Manufacturer support article. Read 2026-11-18.
- GE MWF Refrigerator Water Filter - MWFP (product page) — GE Appliances. Manufacturer product page. Read 2026-11-18.
- Refrigerator - Replacing the Water Filter — GE Appliances. Manufacturer support article. Read 2026-11-18.
- Refrigerator - RPWFE Operation and Troubleshooting — GE Appliances. Manufacturer support article. Read 2026-11-18.
Spotted a mistake? See the methodology page for how to report it.
Last verified: against the manufacturer pages listed on this page.