Fridge Filter Finder

How to reset the water filter light, by brand

Everydrop says resetting the indicator light only resets the light; it does not replace or refresh the filter. Change the filter first, then reset. Steps below are each manufacturer's own wording; buttons vary by model, so your owner's manual wins.

BrandWhat the manufacturer says
SamsungSamsung US: standard models, press and hold the Filter Reset button on the control panel for three seconds. Family Hub models: Apps, Fridge Manager, Fridge Settings, Water Filter, Reset. Models with arrow buttons: More Options, Filter Reset. Models RF4289 and RSG309: Settings, Water Filter, hold Reset until the status changes. Samsung US support
LGLG: press and hold the Water Filter or Filter Reset button on the control panel for 3 seconds; the reset is done when you hear a chime or the indicator turns off. LG: replace the filter
GE (SmartWater and XWF)GE: press and hold the RESET WATER FILTER pad on the dispenser or control panel for about 3 seconds until the red light goes off or turns green. Too short and the light stays on; too long and it goes off and comes back on. GE: side-by-side filter
GE (XWFE, RFID)Automatic on XWFE fridges per GE: the reminder resets when a new RFID filter is installed. Where the fridge has a RESET WATER FILTER pad, hold it about 3 seconds until the red light goes off or turns green. GE: filter indicator light
GE (RPWFE)Automatic. GE says the RFID resets the Replace Water Filter reminder when a new RFID filter or the bypass plug is installed; on touch-screen models there is no way to reset it manually. GE: filter indicator light
WhirlpoolThe process varies by model. Whirlpool says the reset button is typically on a control panel attached to the interior ceiling on French-door models and often on the dispenser control panel on side-by-side models; hold it a few seconds until a beep or chirp, and check the manual. Whirlpool: how to replace
EverydropEverydrop: resetting the indicator light only resets the light; it does not replace or refresh the filter. Everydrop: Filter 1 Button steps: unknown (not on the Everydrop page we read).
FrigidaireFrigidaire (general advice, not filter-specific): hold the reset button for 3-5 seconds until the indicator clears. Frigidaire: changing the filter
KenmoreUnknown. Kenmore's filter pages we read give no reset steps.

If the light will not go off or comes back on

Next: how much water to run through the new filter (several brands say to flush before you reset), and how often to replace.

Sources for this page

Last verified: against the manufacturer pages listed on this page.