Fridge Filter Finder

Everydrop Filter 1 (EDR1RXD1)

Filter 1 is the purple push-in filter that Everydrop (Whirlpool Corporation) sells for Whirlpool, KitchenAid, Maytag, Amana and JennAir refrigerators. The number to look for on your old filter or box is EDR1RXD1.

How to tell it is the right one

  1. Everydrop color-codes its filters. Filter 1 is purple. Match the number or letter and the color on your current filter to the packaging.
  2. Filter 1 is a push-in filter. Everydrop lists Filters A, 2, 4, 5 and 6 as twist-in, and Filters 1 and 3 as push-in. A twist-in filter will not be a Filter 1.
  3. Not sure what you have? Everydrop's page says you can enter your fridge model number, or the model printed on the old filter, into its Find Your Filter tool.

Where is the fridge model number? Everydrop lists six places: the ceiling inside the fridge, the inside walls of the fridge or freezer (sometimes behind drawers), the frame behind an open door, behind the kickplate, the back of the fridge, and on a door. Details are in our find-your-number guide.

Alias numbers: what is and is not confirmed

EDR1RXD1 is the number Everydrop prints. GE Appliances' Culligan page lists WHR1RXD1 and KAD1RXD1 next to EDR1RXD1 as the Whirlpool-brand and KitchenAid-brand originals for Filter 1. That is a statement by another manufacturer (Culligan, sold through GE), not by Whirlpool, so the table below labels it that way.

You will see other numbers on retail listings, including Kenmore-style numbers. Whirlpool's current page does not list them, so neither do we. Kenmore is also not named on Everydrop's current fit statement. If you own a Kenmore-branded fridge, use Everydrop's finder.

If you are comparing against a Culligan CUW1, our finder shows what GE/Culligan says it replaces, flagged as aftermarket.

Install and flush (Everydrop's steps, paraphrased)

  1. Find the filter cap. Do not remove it yet.
  2. Press the eject button and pull the cap. Do not twist it. Then turn the cap counterclockwise to remove it from the old filter and set it aside.
  3. Take the packaging and O-ring covers off the new filter, put the cap on it, and push the filter into the base grille until the eject button pops.
  4. Tug gently to check it is snug, align the arrows on the cap and filter, and turn clockwise to snap it in.
  5. Flush air from the line: with a cup, hold the dispenser for 5 seconds, release for 5 seconds, repeat until water flows, then keep going for about 2 more minutes. Repeat if the dispenser drips.

Source: Everydrop: Filter 1 (FAQ). Your fridge manual may differ. Follow it if it does.

Replacement timing

Everydrop recommends every 6 months and says to change sooner depending on usage and water quality. The indicator light only resets the light; the page states it does not refresh the filter. We did not find a gallon rating on the page.

Everydrop Filter 1 (EDR1RXD1)

Whirlpool / Everydrop

Quick answers

QuestionAnswerSource
StatusListed as a current product on everydropwater.com (page read 2026-11-18).Everydrop: Filter 1
Fits fridge brandsWhirlpool, KitchenAid, Maytag, Amana and JennAir. Page also says French-door, side-by-side, bottom-mount and top-mount layouts. Kenmore is not named on the current page.Everydrop: Filter 1
InstallPush-In (Everydrop calls Filters 1 and 3 push-in). Color: purple.Everydrop: Filter 1
Replace every6 months; sooner depending on usage and water quality.Everydrop: Filter 1
Capacity (gallons)Unknown: not stated in the OEM sources we readEverydrop: Filter 1
RFID / chipUnknown: not stated in the OEM sources we readEverydrop: Filter 1
Bypass plugUnknown: no bypass-plug information on the page.Everydrop: Filter 1

Part numbers and aliases

NumberWhat it isSource
EDR1RXD1Number printed by the manufacturerEverydrop: Filter 1
WHR1RXD1Alias / other name
Cross-reference published by GE Appliances/Culligan, not by the filter's own manufacturer.
GE/Culligan cross-ref
KAD1RXD1Alias / other name
Cross-reference published by GE Appliances/Culligan, not by the filter's own manufacturer.
GE/Culligan cross-ref

Everydrop's page says filters are color-coded: match the number/letter and color on your current filter. Phone: 1-800-442-9991 (page lists Mon-Fri 8am-6pm ET).

Everydrop does not publish a model-by-model fit list on this page; it sends you to its finder tool. This site therefore has no fridge-model rows for Filter 1.

Fridge models

No fridge-model list for this filter in our sources. Use the manufacturer finder below.

Sources for this page

Data last checked 2026-11-18 against the pages above. Spotted a mistake? See the methodology page for how to report it.